近日買咗張display card,  主要係想用tv-out出電視睇片,

但出到電視時有好x什訊(橫紋,曲紋)請問係咪正常?定係張卡有問題要去換?..(我用s線輸入)

要點set出電視會清d...



(his, 256m, ddr)

thank very much!!

ultraegg :
正在嘗試聯絡作者。 April 3, 07

個人經驗用返普通COMPOSITE VIDEO CABLE會清過用S-VIDEO CABLE, 原因不明!

我試用普通電視, DLP電視, PLASMA, LCD都係一樣, 電視或電腦內的SETTING 點轉都無改善, 所以暫時都只係用COMPOSITE VIDEO CABLE
但如果經VIDEO BOX或LAPTOP出的話, S-VIDEO CABLE又正常喎!!

if u use s-video for output to TV will give out a very bad quality  so the display card i think hv no any problem     
If u want to output to TV i suggest u to use HDMI but only a few display card support   SO  THE BETTER WAY
to see high quality movie on TV is to buy a DVD-RW  to burn the movie on it  and  play on TV
DON"Y worry about the display card.................

I suspect that you might not have the right driver for your Display Card.    I had the same problem with my FX5200 before.  Go to the manufacturer's website, download the most recent driver for your model and run it.  It might fix your problem.

呢個情況我都有遇過，其實係條S端子線唔啱，試下去電器鋪買啲靚嘅S端子線試試。

sorry!!gm耐先復貼....
換咗條靚啲嘅S端子線已經好好多...
thnak!!各位!!