我一向用開 TMPGEnc Plus-2.54.37.135_cht 和 REAL ALTERNATIVE 110 來轉 RMVB 成 MPEG , 一向都做得好順。

但是最近有兩個新出直接下載的 RMVB 版本，我就嘗試下載兩個版本作比較。於是問題來了: 我發覺 RAY 的版本有影冇聲，但畫面超靚。我於是請教 RAY 應該點做，他教我可以 download 最新的 REAL ALTERNATIVE 版本 ( 即係 REAL ALTERNATIVE 151 )便可以聽到聲音 ,於是我照就，果然是聲到聲音，但我發覺 TMPGEnc Plus-2.54.37.135_cht 和 REAL ALTERNATIVE 151 有 CONFLICT 。

有兩種個情況, 第一個情況是 我 想 轉 Ray 的版本時，只能轉一個 file, 之後每開一次 TMPGEnc Plus，佢都 no responsing, 除非我 restart個電腦，否則個 TMPGEnc Plus都唔 work, 即使 work 返，都轉唔到 原次郎的 RMVB，只能轉 Ray 的 RMVB。

第二個情況是我 re-install 返個 REAL ALTERNATIVE 110, 個 TMPGEnc Plus 可以 work 返，可以 轉 到原次郎的 RMVB成為 MPEG, 但係 就轉唔到 Ray 的 RMVB , 而且看 Ray 的版本時又再變成 有影冇聲。

我如果想繼續用TMPGEnc Plus-2.54.37.135_cht 來轉 format ( 我唔想用第二種 software ), 又想同時轉到 Ray 和原次郎的 RMVB, 我應該點樣做？請大家幫幫忙， Thank you very much.

你 用 avs script 黎 frameserve 啦。下載 http://downloads.sourceforge.net ... 96&big_mirror=0
2.56a 版本係最常用和穩定。

基本 AVISynth 其實係幾簡單的﹐但如果要加強其它功能就會非常複雜。
安裝時在第二個畫面剔 associate avs file with Notepad 和 associate avs file with media player 6.4(play)
安裝後打開 notepad﹐填上目標途徑﹐(只可以用英文和數字) 跟住 save as (all file) ﹕xxx.avs 就得。
Exsample﹕


*住意﹕只有在豆點  (﹐comma )後先可以 space

跟住就可以  save as 01.avs﹐係 save 時﹐一定要選擇 all file。
*個途徑 C﹕\XXX\XXX.rmvb 係用你本身 rmvb 檔既路徑。







完成後用鼠標右 click avs 檔﹐選 open with﹐選 media player classic 測試。如果可以播放的話﹐即係 avs 途徑正確。這個時候就可以用 Tmpgenc 來轉碼。

Agelessoldman, thank you very much for your advice. But it doesn't work. I saw a message was as follow:

Script error: expected a, or )
(C:\TVB\01.avs, line 1, column 20)

I think that there should be some problems with my computer. You suggust me to try fps=25. Should I try the other numbers instead of 25?

Make sure there are no spaces throughout the whole script except after comma.

Although there are numbers of reasons for errors, most commonly is the script was written incorrectly.
Post the exact script so maybe I can look at it.

winicool, have you tried K-Lite Codec Pack?

I am using TMPGEnc Plus 2.54.37.135 with K-Lite Codec Pack 2.65 and it's been working fine.

Now I am not using Real Alternative at all since K-Lite already comes with the codec I need.  So before you install K-Lite, you might want to uninstall all the previous codec first (such as Real Alternative).  I just installed K-Lite with the default configurations.

Hope that helps.

K-Lite Codec Pack is free to download:  Click here to download

Mickey, thank you very much for your advice. I have installed K-Lite Codec Pack. Right now, I find that I can watch Ray's rmvb file. ( with sound and with picture ) But....I still can not convert Ray's rmvb file by TMPGEnc Plus 2.54.37.135. But I am okay to convert 原次郎 's rmvb file.

Klite comes with Real Alternatives.


I remembered downloaded a couple of Ray's relaese a long while ago, I had no problem converting if I remembered right.

If you don't want to go the avisynth route, which I think is the best solution, try install a newer version of ffdshow. Klite also comes with ffdshow, but it could be an older version. Set ffdshow to decode all compatable codecs, then move the directshow reader of Tmpgenc to highest priority. This might work.

On a side note, if you have Storm Codecs installed, remove it immediately.

Agelessoldman & Mickey, thank you very much for your advice. I spend two days to try many methods ( including avisynth route & K-Lite ).  I finally fix the problem by downloading "realpack-20060226". After installing this decoder, I can convert Ray's and 原次郎 's rmvb file now. Anyway, thank you very much with your helps.

Good to hear you'd solved the problem. But as far as improving your skill and knowledge on video encodings and such, you should learn to use avisynth.

用...ACEMegacodecpackprofessional6.03來轉,就轉到 Ray 的 RMVB to mpg.